For all those people who are passionate about their vehicles like to transport them from one place to another in an appropriate manner. When it comes to transporting your ATV, one of the finest ways to go about it is to transport it in a truck, where there are fewer chances of mishap and, most importantly, even fewer chances of damaging your ATV before it reaches the destination.
However, when you aim to transport it to the truck, one of the safest means to go about it is through the loading ramps. These ramps enable you to move your ATV from the road to the truck. If you are among those individuals who are looking to load their ATVs onto their trucks, here is a step-by-step guide to doing so.
Here is a list of steps that you need to follow to make sure that you safely locate the ATV to the loading ramps.
- Purchase ramps:
One of the very first things that you need to make sure that you purchase good quality ramps. Look out for proper safety features in your ramps, like the side walls and other important details. Moreover, it is important to mention here that each ramp comes with a rating of the weight that it could pull up and gives you an average weight that it could bear along with the weight of the driver.
This enables you to understand that there are certain weight restrictions that you need to follow to safely transport the ATV off the road to the truck.
2. Secure the ramps:
Now, another important aspect to make note of about the ramps is to make sure that before you start moving the ATV on the Ramps, they are safely secured. You could always use the tie-down or straps tied to the truck to make sure that you avoid any sort of slipping away or sliding off the truck from the ramps.
Thus, make sure that you use a separate strap for each ramp, secure the truck with the strap, and secure the frame of the truck as well.
3. Strap on the helmet:
We often take the shortest rides for granted, where you only have to drive the ATV for a few minutes. But remember, accidents are common in any such incidents, and therefore, you want to save your brain as well as your face.
When you have these two things secured, the chances of accident and getting them fatally destructive are reduced; therefore, never forget to put a strap on the helmet.
4. Fine proper positioning:
Understand that the ramps are difficult to drive and, therefore, keep the truck and the ramps aligned in a straight line.
5.Pick the right gear:
For those who have been doing it again and again, the task seems to be simple, and they are tuned to getting things right; however, for all those who are doing it for the first time. Be specific about your gear. Make sure to put your ATV in the lowest gear.
What you are aiming at in this whole process is low speed and the highest possible power.
6. Keep it firm:
Those who are seasoned drivers give you a sense of relief, but those who are doing it for the first time need to take an extra bit of caution. Make sure to apply the throttle firmly and smoothly. You don’t want to slip backward while you are on the ramp. And therefore, make sure to keep things as firm as possible.
7. lowly creep in:
The key is to keep it slow and gently creep into the truck to make sure that you enjoy the slide. Remember to keep the engine on for a while before you park the ATV and apply your parking brakes. However, it is important to note that you take away the keeps from the engine when you have finally and firmly parked the ATV onto the car.
8.The final bit of caution:
While you look forward to parking your ATV onto your truck, don’t miss out on securing the ATV with straps. Make sure to do it with the help of a number of people who could be of some assistance for you to park the trucks onto your ATV van. Visit: Express Ramps
