Having a new kitchen sink tap faucet installed is an exciting DIY effort to enhance the appearance of your kitchen. Especially if you are getting a sleek modern piece or replacing a spoilt faucet, the task can be straightforward with the proper tools and sufficient information. Every stage, from removing the old faucet to fastening the new one, is essential and needs to be done precisely for a successful installation. If you need expert assistance, you can rely on professional services at https://www.plumbersingapore.org/kitchen-sink-taps-faucet-installation-replacement/.
Why Replace Your Kitchen Faucet?
Understanding what compels you to attempt installing a new kitchen sink faucet will help before we delve into the installation process. Efficient modern faucets can save water are leak-proof and have an eye appeal for your kitchen fixture. Newer styles of faucets often come with inline features to adjust the water flow and temperature. If you would like to avoid doing the installation process yourself, you can consult experts at https://www.plumbersingapore.org/our-services/ .
What You’ll Need
To ensure meticulous planning of your installation, here are some tools and materials you may require:
- Cloth to clean after your tasks
- Faucet kit
- Plumber’s putty
- Pipe tape (Teflon tape)
- Adjustable Wrench
- Basin Wrench
Step 1: Shut Off the Water Supply
Always avoid working with running water. As a thumb rule, shut-off valves rest below the sink—locate them and rotate them clockwise to switch them off. Shut the old faucet and put it into the open position to drain out any water remaining in the pipes.
Step 2: Take Off the Old Faucet
The time has come to remove the faucet. Use a basin or adjustable wrench, whichever is available, to loosen the nuts that previously fixed the faucet in position. To keep the area clean, keep a towel to soak up the remaining spilled water. Lift the faucet away from the sink gently after loosening.
Step 3: How to Put In a Faucet
Check that the new faucet corresponds with the mounting holes on the sink. Take the plumber’s putty and cover the base of the faucet to ensure that it seals entirely and leaks do not occur. Then, place the faucet in its required position. Ensure that the faucet is level in all positions.
Step 4: Reinforce the faucet
After placing the faucet in position, the next step is to lock it. This step is vital as it guarantees the faucet will not get loose at any point in the future. Steps to follow:
- Align the Faucet: Before holding it in place, check that it is facing the right way, i.e level with the sink and its holes.
- Tighten the Mounting Nuts: Start by securing the faucet with the nuts that were provided to the hand to secure it.
- Use an Adjustable Wrench: Grab the adjustable wrench and turn the nuts slightly, but ensure you don’t go too far, as the faucet and sink might suffer.
Step 5: Connect the Water Supply Lines
Reconnect the water supply lines to the faucet. Connect the lines to the faucet’s inlet valves, making sure the connections are secure. Where required, pipe tape can be used on the threads to ensure a proper seal. Use a wrench to tighten the connections.
Step 6: Test for Leaks
With everything hooked up, slowly turn on the water supply and search for leaks. Operate hot and cold water on the faucet to check if the water flows correctly and if there are any problems with the connection points. If leaks occur, tighten the connections, clean the threads, and apply more tape.
Step 7: Final Touches
After the checks are done and the new faucet is working properly with no leaks, clean the space around it and remove any excess plumber’s putty. The new faucet should now be secure, and everything should be cleaned.
Need Professional Help?
If you cannot install the faucet alone or experience problems, do not hesitate to seek professional assistance. Companies such as Plumber Singapore’s provide complete installation services, and you will save plenty of time in the process.
