So you have completed the process of setup for your Netgear extender. But what’s that? The extender requires reboot every time when you do something new on it. No doubt even the most reliable and best-performing WiFi range extender needs to be restarted but it normally happens once in a while. And if you are rebooting the extender every third day just to stay online, that’s something you really need to pay attention. This results in slowing down of an extender. Therefore, it is utterly important to fix this issue as soon as possible.

In order to run the extender effectively and remove the hassle of rebooting it again and again, read this tutorial from start to end. Here, we will discuss the tips and tricks to resolve the problem within a matter of minutes. Continue reading.

  1. Is your extender overloaded?

Nearly all home extenders require to be restarted occasionally for a fresh start with no accumulated memory or processor baggage. Essentially, the extender works like an airplane for your network, lifting up the existing signals to reach dead zones. Obviously, it is a lot of work and the extender doesn’t always go well. In case its memory and processor gets overloaded, the device can lock up or slow to a crawl.

One of the main reasons that your extender is not working well even after a complete Netgear extender setup is overheating. Several ISPs or Internet Service Providers tend to offer dynamic IP addresses to users for allocating a permanent address to them. It changes once in a while and renewed by ISP. This process slows down the extender processing. The ultimate solution here is restarting the extender which can be done by putting the power off from the socket and then again turning it off but after a couple of minutes.

  1. Start with an update

Get started by ensuring that your extender has latest firmware update on it. Regular updates simplify the extender’s operations making better use of the resources and averting it from slowing down. Furthermore, updating the firmware is a gentle reminder that it might be time to change the extender password for keeping everything secure. You can update the Netgear extender firmware via mywifiext.local web address.

  1. Is the extender too hot to touch?

The next step is to check the extender and feel if it is hot or not. In case it is warm to touch means the temperature is around 100 degrees Fahrenheit, then nothing to worry. But on the other hand, if the temperature is more than 115 degrees Fahrenheit, it indicates that the device is overheating. You can also use a thermometer to know more information about temperatures particular to your product.

  1. Check the power connectors

Do a favor for yourself and check the power supply provided to your extender via a wiggle test. Disconnect the extender from power by jiggling both the extender’s plug and AC plug while watching the lights on extender. If the plugs go out, it means the extender might not be receiving a constant power flow resulting in online outages. The most excellent fix is to move the plugs apart from one another or replace the supply plug. Once done, try accessing on any WiFi-compatible device to check whether the issue got fixed or not.

  1. Use a USB Fan

If you still face the same problem, it’s recommended you to use a USB fan. This is a cost-effective device which can be bought easily. Just plug this device into the extender’s USB port. Once done, it will pull the hot air from your range extender and throw it outside. Now try accessing URL after connecting a smart device to your extender network.

So our list of different ways to resolve the rebooting issue of your extender ends here. If you have your own tips for the same, do remember to share them with your fellow readers via the comments section below.

(Visited 1 times, 1 visits today)